|
|||||
|
|
| CSP中碳钢中心纵向裂纹控制 | |
| 引用本文： | 石向东,李建,成泽伟. CSP中碳钢中心纵向裂纹控制[J]. 连铸, 2011, 0(1): 15-18 |
| 作者姓名： | 石向东 李建 成泽伟 |
| 作者单位： | 1. 中钢科技发展有限公司,北京,100080 2. 北京科技大学冶金与生态工程学院,北京,100083;酒泉钢铁集团公司,碳钢薄板厂,甘肃嘉峪关,735100 3. 北京科技大学冶金与生态工程学院,北京,100083 |
| 摘 要： | 针对酒钢CSP生产中碳钢Q235B过程中铸坯表面出现的中心纵向裂纹缺陷,通过理论研究、试验分析和技术攻关措施,分析了中心纵向裂纹分布特点、形貌特点和产生机理,研究了钢中夹杂、钢水硫含量、结晶器锥度、结晶器保护渣和铸机工况参数等因素对中心纵向裂纹的影响,通过调节控制各主要参数,使Q235B纵裂纹发生率由2.89%降低到0.36%左右。 |
| 关 键 词： | CSP 纵向裂纹 Q235B 中碳钢 |
Control of Longitudinal Surface Crack in the Center of CSP Medium Carbon Steel |
|
| SHI Xiang-dong,LI Jian,CHENG Ze-wei. Control of Longitudinal Surface Crack in the Center of CSP Medium Carbon Steel[J]. CONTINUOUS CASTING, 2011, 0(1): 15-18 | |
| Authors: | SHI Xiang-dong LI Jian CHENG Ze-wei |
| Affiliation: | 1. Sinosteel Scie-Tech Development Company,Beijing 100080,China;2.School of Metallurgical and Ecological Engineering,University of Science and Technology Beijing,Beijing 100083,China;3.Carbon Steel Rolled Product of Jiuquan Iron and Steel Group Ltd.,Jiayuguan 735100,Gansu,China) |
| Abstract: | In order to avoid longitudinal surface crack in the center of CSP medium carbon Q235B steel produced in JISCO,the distribution,feature and mechanism of longitudinal surface crack were analyzed by theoretical research,experimental analysis and technical measures;the effect of factors such as inclusions in steel,sulphur content in molten steel,mould taper,mould powder,caster condition and parameters on longitudinal crack was researched.The longitudinal crack rate of Q235B steel has been decreased from 2.89% to 0.36% by regulating main factors. |
| Keywords: | CSP longitudinal surface crack Q235B medium carbon steel |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |