| 广6注水系统注入水防垢机理的研究与应用 |
| |
| 引用本文： | 万彬,王天奇,章祥林,梁娟.广6注水系统注入水防垢机理的研究与应用[J].江汉石油职工大学学报,2006,19(6):70-72. |
| |
| 作者姓名： | 万彬 王天奇 章祥林 梁娟 |
| |
| 作者单位： | 中国石化胜利油田有限公司清河采油厂,山东寿光262714 |
| |
| 摘 要： | 广6注入水系统注入水结垢的主要原因是地层产出水中含有大量的成垢离子,加上水中含泥砂太多,在生产过程中,地层水从地层到地面温度和压力都下降,使地层水的溶解平衡被破坏,原来饱和的地层水为达到新的平衡而结晶,析出后与地层中的泥沙一起沉积在管壁上。针对这种情况,采取控制PH值、去除溶解气、进行水的软化处理等方法进行防垢,效果较好。在广6注水系统投加缓蚀阻垢剂DF-3(浓度为30mg/l),其缓蚀率为91.2%,阻垢率为97.8%。
|
| 关 键 词： | 广6注水系统 注水压试验结垢 防垢机理 防垢方法 |
| 文章编号： | 1009-301X（2006）06-0070-03 |
| 收稿时间： | 2006-04-20 |
| 修稿时间： | 2005年4月20日 |
Research and Application of Mechanisms of Preventing Injected Water from Scaling in Guang-6 Water Injection System |
| |
| WAN Bing, WANG Tian-qi, ZHANG Xiang-lin, LIANG Juan.Research and Application of Mechanisms of Preventing Injected Water from Scaling in Guang-6 Water Injection System[J].Journal of Jianghan Petroleum University of Staff and Workers,2006,19(6):70-72. |
| |
| Authors: | WAN Bing WANG Tian-qi ZHANG Xiang-lin LIANG Juan |
| |
| Abstract: | This paper analyzes the main reasons why injected water scales in Guang-6 Water Injection System of Bamianhe Oilfield and proposes several efficient methods including controlling pH value,removing dissolved gas and softening water.Adding DF-3(30mg/l concentration) corrosion and scale inhibitor into Guang-6 water injection system gets 91.2% rate of corrosion inhibition and 97.8% rate of scale inhibition. |
| |
| Keywords: | Guang-6 water injection system scaling testing by injecting water pressure mechanisms of scale prevention methods of scale prevention |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
