| 手柄杆零件的钻床夹具设计 |
| |
| 引用本文： | 朱立初.手柄杆零件的钻床夹具设计[J].机械工程师,2010(12):99-100. |
| |
| 作者姓名： | 朱立初 |
| |
| 作者单位： | 长沙南方职业学院,长沙410208 |
| |
| 摘 要： | 零件加工前必须先正确装夹,批量大的零件或形状复杂无法直接装夹的零件,必须设计专用夹具。文中通过具体实例的典型设计方法,分析了零件装夹的定位原理和夹紧装置。通过对实例的论述,说明了夹具设计的基本思路,并能根据该实例,举一反三设计各种钻床夹具。
|
| 关 键 词： | 机床夹具 定位 自由度 夹紧 |
Design of Drill Clamping Apparatus for Processing Handlebar |
| |
| ZHU Li-chu.Design of Drill Clamping Apparatus for Processing Handlebar[J].Mechanical Engineer,2010(12):99-100. |
| |
| Authors: | ZHU Li-chu |
| |
| Affiliation: | ZHU Li-chu (Changsha Nanfang Vocational College, Changsha 410：208, China) |
| |
| Abstract: | Before processing, workpiece must be clamped correctly. Clamping apparatus must be designed for the complicated or large hatch product. The drill positioning principle and clamping apparatus are analyzed for processing handlebar, which can provide basic design method for processing engineer. |
| |
| Keywords: | apparatus position freedom clamp |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
