| 无键联接过盈量的合理选择及应用 |
| |
| 引用本文： | 刘贞海,李建文,于蕾. 无键联接过盈量的合理选择及应用[J]. 山东冶金, 2002, 24(3): 52-54 |
| |
| 作者姓名： | 刘贞海 李建文 于蕾 |
| |
| 作者单位： | 济南钢铁集团总公司中板厂,山东,济南,250101 |
| |
| 摘 要： | 三辊轧机安全接手法兰 (二 )与主减速机低速齿轮轴采用的是无键联接装配。为了实现二者的有效联接 ,对三辊轧机安全接手法兰 (二 )的受力进行了分析 ,并合理选择二者的装配过盈量 ,以最大可能地减少或者消除法兰 (二 )在低速轴上的转动角度 ,在包容件不发生塑性变形的情况下 ,实现了二者的有效配合
|
| 关 键 词： | 无键联接 法兰 齿轮轴 过盈量 |
| 文章编号： | 1004-4620(2002)03-0052-03 |
| 修稿时间： | 2001-11-14 |
Reasonable Choice and Application of Non-key Coupling Interference |
| |
| LIU Zhen hai,LI Jian wen,YU Lei. Reasonable Choice and Application of Non-key Coupling Interference[J]. Shandong Metallurgy, 2002, 24(3): 52-54 |
| |
| Authors: | LIU Zhen hai LI Jian wen YU Lei |
| |
| Abstract: | Non key coupling is fitted between flange (2) of the safety clutch in three high rolling mill and low speed gear axis of direct speed down machine In order to realize the effective coupling, the accepting force of flange (2) of the safety clutch in three high rolling mill is analyzed, and the magnitade assembly interference of them is selected reasonably, thereby the rotation angle of flange on low-speed axis can be reduced or eliminated farthest In the condition of containing part without plastic deformation, the fit between flange (2) and low speed axis can be realized effectively |
| |
| Keywords: | non key coupling flange gear axis magnitade of assemble interference |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
