|
|||||
|
|
| 喷水冷却对400MPa级超细晶粒钢焊接接头组织和性能的影响 | |
| 引用本文： | 赵洪运,王国栋,杨德惠,裘坤,王立夫. 喷水冷却对400MPa级超细晶粒钢焊接接头组织和性能的影响[J]. 金属热处理, 2005, 30(11): 28-30 |
| 作者姓名： | 赵洪运 王国栋 杨德惠 裘坤 王立夫 |
| 作者单位： | 1. 东北大学,轧制技术及连轧自动化国家重点试验室,辽宁,沈阳,110004;长春工业大学,材料科学与工程学院,吉林,长春,130012 2. 东北大学,轧制技术及连轧自动化国家重点试验室,辽宁,沈阳,110004 3. 长春工业大学,材料科学与工程学院,吉林,长春,130012 |
| 摘 要： | 采用手工电弧焊焊接400MPa级超细晶粒钢，并对不同冷却条件下的焊接接头显微组织及力学性能进行分析。结果表明，400MPa级超细晶粒钢手工焊焊接接头热影响区存在着严重的晶粒长大和强度下降现象；焊接过程中采用喷水冷却可明显提高焊接接头强度，实际生产中可以应用手工电弧焊水冷处理方法焊接400MPa级超细晶粒钢。 |
| 关 键 词： | 超细晶粒钢 显微组织 力学性能 |
| 文章编号： | 0254-6051（2005）11-0028-03 |
| 收稿时间： | 2005-06-16 |
| 修稿时间： | 2005-06-16 |
Effect of Spraying Water on the Microstructure and Mechanical Properties of 400MPa Grade Ultrafine Grained Steel in Welded Joints |
|
| ZHAO Hong-yun,WANG Guo-dong,YANG De-hui,QIU Kun,WANG Li-fu. Effect of Spraying Water on the Microstructure and Mechanical Properties of 400MPa Grade Ultrafine Grained Steel in Welded Joints[J]. Heat Treatment of Metals, 2005, 30(11): 28-30 | |
| Authors: | ZHAO Hong-yun WANG Guo-dong YANG De-hui QIU Kun WANG Li-fu |
| Affiliation: | 1. State Key Lab of Rolling and Automation, Northeastern University, Shenyang Liaoning 110004, China ;2. School of Materials Science and Engineering, Changchun University of Technology, Changchun Jilin 130012, China |
| Abstract: | The specimens of 400MPa grade ultrafine grained steel were welded by manual arc welding, the microstructure and mechanical properties of welded joints under different cooling condition were analyzed. The results show that the cases about grain size increasing greatly and strength decreasing do exist in HAZ of manual arc welded joints of 400MPa grade ultrafine grained steel. The strength of welded joint could be increased obviously by water cooling in course of welding, and the process of manual arc welding with water cooling is practical for welding ultrafine grained steel. |
| Keywords: | ultrafine grained steel microstructure mechanical properties |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |