Fuzzy modeling of the forced convection heat transfer from a V‐shaped plate exposed to an air slot jet |
| |
Authors: | Tooraj Yousefi Alimohammad Karami Ehsan Rezaei Saeid Ebrahimi |
| |
Affiliation: | 1. Department of Mechanical Engineering, Razi University, Kermanshah, Iran;2. Department of Mechanical Engineering, Kermanshah University of Technology, Kermanshah, Iran |
| |
Abstract: | This paper focuses on the application of fuzzy logic (FL) to predict the forced convection heat transfer from V‐shaped plate internal surfaces exposed to an air impingement slot jet. The aim of the present paper is to consider the effects of the angle of a V‐shaped plate (Φ), slot‐to‐plate spacing ratio (Z/W), and Reynolds number (Re) variation on average heat transfer from the V‐shaped plate internal surfaces. The data used for developing the FL structure was obtained experimentally by a Mach‐Zehnder interferometer. The proposed FL was developed using MATLAB functions. It was observed that the average Nusselt number will be decreased with an increase in jet spacing and be increased with an increase in Reynolds number and angle of V‐shaped plate. Moreover, it is also shown that fuzzy logic is a powerful technique to use for predicting heat transfer due to its low error rate. The average error of the fuzzy predictions compared with experimental data was found to be 0.33% for this study. © 2012 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.21009 |
| |
Keywords: | forced convection V‐shaped plate slot jet Mach‐Zehnder interferometer modeling fuzzy logic |
|
|