Effect of tilted plate vibration on solidification and microstructural and mechanical properties of semisolid cast and heat-treated A356 Al alloy

To optimize the machining process, finding the minimum uncut chip thickness is of paramount importance in micro-scale machining. However, strong dependency of the minimum uncut chip thickness to the tool geometry, workpiece material, tool-work friction, and process condition makes its evaluation complicated. The paper focuses on determination of the minimum uncut chip thickness experimentally during micro-end milling of titanium alloy Ti-6Al-4V with respect to influences of cutting parameters and lubricating systems. Experiments were carried out on a CNC machining center Kern Evo with two flute end mills of 0.8 and 2 mm diameters being used in the tests for micro- and macro-milling, respectively. It was found that the micro-milling caused more size effect than macro-milling due to higher surface micro-hardness and specific cutting forces. The specific cutting force depended strongly on feed rate (f _z) and lubricating system, followed by depth of cut (a _p) and cutting speed (v _c), mainly in the micro-scale. All output parameters were inversely proportional to the specific cutting force. Finally, depending on different process parameters during micro-milling of Ti-6Al-4V, the minimum uncut chip thickness was found to vary between 0.15 and 0.49 of the tool edge radius.