Fatigue strength of rolled JIS SM50A beams

The fatigue strength of rolled beams with stiffeners welded to the web was examined. The state of residual stress in these beams was varied by different cooling and straightening processes. Parallel series of tests were carried out both on plate specimens with corner-notches, simulating the edge notches in the beam-flange tip, and on fillet welded specimens. These test results were analysed using the fracture mechanics concepts of stable crack growth. A new fracture mechanics model for cracks originating from notches is proposed. This is based on the concept that the cyclic plastic zone size at the root of a notch determines the equivalent size of the notch as a fatigue crack. With this model, the severity of notches as well as their size can be taken into account to describe the initial flaw conditions. With the initial crack size estimated, a theoretical crack-growth equation was derived from the fatigue test data of rolled beams and notched plates. The analysing method together with the derived relationship was applied for the evaluation of the fatigue strength of welded beams and transverse fillet welds. The effect of residual stresses on fatigue behavior of these beams and plate specimens was also estimated by assuming an additional effect of the maximum stress on the theoretical crack-growth equation.