Conservative reliability-based design optimization method with insufficient input data

Reliability analysis and reliability-based design optimization (RBDO) require an exact input probabilistic model to obtain accurate probability of failure (PoF) and RBDO optimum design. However, often only limited input data is available to generate the input probabilistic model in practical engineering problems. The insufficient input data induces uncertainty in the input probabilistic model, and this uncertainty forces the PoF to be uncertain. Therefore, it is necessary to consider the PoF to follow a probability distribution. In this paper, the probability of the PoF is obtained with consecutive conditional probabilities of input distribution types and parameters using the Bayesian approach. The approximate conditional probabilities are obtained under reasonable assumptions, and Monte Carlo simulation is applied to calculate the probability of the PoF. The probability of the PoF at a user-specified target PoF is defined as the conservativeness level of the PoF. The conservativeness level, in addition to the target PoF, will be used as a probabilistic constraint in an RBDO process to obtain a conservative optimum design, for limited input data. Thus, the design sensitivity of the conservativeness level is derived to support an efficient optimization process. Using numerical examples, it is demonstrated that the conservativeness level should be involved in RBDO when input data is limited. The accuracy and efficiency of the proposed design sensitivity method is verified. Finally, conservative RBDO optimum designs are obtained using the developed methods for limited input data problems.