首页 | 本学科首页   官方微博 | 高级检索  
     

聚丙烯酰胺/硅藻土复合材料处理染料废水
引用本文:林俊雄,詹树林,方明晖,汪澜. 聚丙烯酰胺/硅藻土复合材料处理染料废水[J]. 稀有金属材料与工程, 2010, 0(Z2)
作者姓名:林俊雄  詹树林  方明晖  汪澜
作者单位:浙江理工大学;浙江大学;
基金项目:浙江省杭州市科技计划项目(20081533F13)资助
摘    要:通过自制阴离子聚丙烯酰胺HPAM对硅藻土矿物改性制备一种有机无机复合吸附剂材料,采用SEM及FTIR技术对复合材料进行表征,并对3种模拟染料废水及2种真实印染污水进行脱色性能研究。结果显示,改性时较佳的HPAM用量在0.8%(质量分数)左右,复合后HPMA高聚物在硅藻土表面大孔内壁形成牙状絮体;通过与未改性硅藻土及颗粒活性炭对上述几种染料废水的处理效果对比,HPMA改性硅藻土复合材料对阳离子染料废水和真实印染废水均具有较高的脱色率。

关 键 词:阴离子聚丙烯酰胺  硅藻土  染料废水  

Treatment of Dyeing Wastewater by Polyacrylamide/Diatomite Composite
Lin Junxiong,Zhan Shulin,Fang Minghui,Wang Lan. Treatment of Dyeing Wastewater by Polyacrylamide/Diatomite Composite[J]. Rare Metal Materials and Engineering, 2010, 0(Z2)
Authors:Lin Junxiong  Zhan Shulin  Fang Minghui  Wang Lan
Affiliation:Lin Junxiong1,Zhan Shulin2,Fang Minghui2,Wang Lan1 (1. Zhejiang Sci-Tech University,Hangzhou 310018,China) (2. Zhejiang University,Hangzhou 310027,China)
Abstract:A new composite adsorbent was prepared via modifying the diatomite by anionic polyacrylamide HPAM. The adsorbent was characterized by SEM and FTIR. Its dye removal performance was studied by three kinds of dye solutions and two actual dyeing wastewater. Results show that the optimum dose of HPAM in the modification of diatomite was 0.8%. The HPAM formed on the cavity wall of the diatomite was tusklike. The colour removal results of HPMA/diatomite composite, compared with the diatomite and commercial activat...
Keywords:aionic polyacrylamide  diatomite  dyeing wastewater  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号