| V-N微合金化含钨改型Cr5W冷轧工作辊用钢 |
| |
| 引用本文： | 武建平,贾建平,王自东. V-N微合金化含钨改型Cr5W冷轧工作辊用钢[J]. 特殊钢, 2007, 28(5): 40-41 |
| |
| 作者姓名： | 武建平 贾建平 王自东 |
| |
| 作者单位： | 1. 中钢集团邢台机械轧辊有限公司，邢台 054025;2. 北京科技大学材料科学与工程学院，北京 100083; |
| |
| 摘 要： | 开发了加V-N合金的含钨改型Cr5W工具钢(%:0.70～0.90C、≤1.00Si、0.20～0.60Mn、4.50～5.50Cr、1.00～1.50W、≤0.15Mo、≤0.3V;300×10-6～350×10-6N)。Cr5W钢960℃淬火后组织为马氏体+碳化物,平均HRC硬度值为63.5,180℃回火后的平均HRC值为63.2,高于Cr5钢(%:0.70～0.90C、≤1.00Si、0.20～0.60Mn、4.50～5.50Cr、0.15～0.70Mo；80×10-6～120×10-6N)180℃的回火硬度(HRC值62.3),在相同硬度下,Cr5W钢的相对耐磨性较Cr5钢提高50%。
|
| 关 键 词： | 改型Cr5W钢 钨 冷轧工作辊 V-N微合金化 |
| 收稿时间： | 2007-03-28 |
| 修稿时间： | 2007-03-28 |
V-N Microalloyed Modified Containing Tungsten Cr5W Steel for Cold Rolling Working Roll |
| |
| Wu Jianping,Jia Jianping,Wang Zidong. V-N Microalloyed Modified Containing Tungsten Cr5W Steel for Cold Rolling Working Roll[J]. Special Steel, 2007, 28(5): 40-41 |
| |
| Authors: | Wu Jianping Jia Jianping Wang Zidong |
| |
| Affiliation: | 1. Xingtai Machinery & Mill Roll Co.,Ltd., Sinosteel,Xingtai 054025;2. School of Materials Science and Engineering , University of Science and Technology,Beijing 100083; |
| |
| Abstract: | The modified containing tungsten added V-N microalloying Cr5W tool steel-0.70～0.90C，≤1.00Si，0.20~0.60Mn，4.50~5.50Cr，1.00~1.50W，≤0.15Mo，≤0.3V，300×10-6～350×10-6N has been developed. Test results indicated that the structure of modified Cr5W steel quenched at 960 ℃ was martensite + carbide,of which the average HRC hardness was 63.5,and the average HRC hardness of modified Cr5W steel after temper at 180 ℃ was 63.2 higher than hardness(average HRC 62.3)of 180 ℃ tempered Cr5 steel(0.70~0.90C，≤1.00Si，0.20～0.60Mn，4.50~5.50Cr，0.15~0.70Mo，with 80×10-6～120×10-6N);and with same hardness value the relative wearing resistance of modified Cr5W steel increased by 50% as compared with that of Cr5 steel. |
| |
| Keywords: | Modified Cr5W Steel Tungsten Cold Rolling Working Roll V-N Microalloying |
| 本文献已被 维普 万方数据 等数据库收录！ |
| 点击此处可从《特殊钢》浏览原始摘要信息 |
|
点击此处可从《特殊钢》下载全文 |
