| 防火助剂和填料细度对防火涂料性能的影响 |
| |
| 引用本文： | 王国建,呼翔. 防火助剂和填料细度对防火涂料性能的影响[J]. 上海涂料, 2010, 48(11): 17-21 |
| |
| 作者姓名： | 王国建 呼翔 |
| |
| 作者单位： | [1]先进土木工程材料教育部重点实验室,上海200092 [2]同济大学材料科学与工程学院,上海200092 |
| |
| 摘 要： | 在固定防火涂料配方的基础上,研究了防火助剂和填料的细度对防火涂料防火性能的影响规律。通过控制涂料的研磨辊间距制备了单一细度变化的涂料,考察了防火涂料的防火性能。研究表明:研磨辊间距为3级时,防火助剂和填料的粒径为0.873μm,涂料的防火性能最好,此时钢板的平衡背温为294℃,60 min背温为295℃,炭化层膨胀倍率达12.94倍,且结构致密,强度高,泡孔均匀。
|
| 关 键 词： | 钢结构防火涂料 细度 防火性能 |
Influences of Fineness of Fireproof Additives and Fillers on the Performance of Fire Retardant Coatings |
| |
| WANG Guo-jian,HU Xiang. Influences of Fineness of Fireproof Additives and Fillers on the Performance of Fire Retardant Coatings[J]. Shanghai Coatings, 2010, 48(11): 17-21 |
| |
| Authors: | WANG Guo-jian HU Xiang |
| |
| Affiliation: | 1.Key Laboratory of Advanced Civil Engineering Materials,Ministry of Education,Shanghai,200092,China;2.School of Materials Science and Engineering,Tongji University,Shanghai,200092,China) |
| |
| Abstract: | Based on a fixed formula,influences of fineness of fireproof additives and fillers on the fire resistance othe coatings were investigated.A series of fire retardant coatings with different fineness were prepared by adjusting theroller distance of triple-roller mill.The fire resistance of these coatings were discussed.The research results showed that the fire resistance of coatings reached the best when the roller distance was level 3.In this case,the particle diameter of fireproof additives and fillers was 0.873 μm.The equilibrium temperature of backside of steel board was 294℃;the back temperature at 60 min was 295℃;the intumescence rate of charred layer reached 12.94 times.Moreover the state ocharred layers reached the best. |
| |
| Keywords: | fire retardant coatings for steel structure fineness fire resistance |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
