| 直筒件强旋缩径的台阶成形与工装 |
| |
| 引用本文： | 梁淑贤.直筒件强旋缩径的台阶成形与工装[J].广东有色金属学报,1994,4(2):120-124. |
| |
| 作者姓名： | 梁淑贤 |
| |
| 作者单位： | 广州有色金属研究院 |
| |
| 摘 要： | 介绍了直筒件缩径和台阶成形的旋压试验过程，着重对台阶的多道次强旋成形工艺、精整工装设计和台阶壁厚检验等方面进行了探索和实践。
|
| 关 键 词： | 旋压 台阶成形 缩径 直筒件 强力旋压 |
ASSEMBLY EQUIPMENT AND STEPPED FORMING FOR POWERFUL SPINNING DIAMETER CONTRACTION OF CYLINDRICAL WORKPIECES |
| |
| LIANG Shuxian.ASSEMBLY EQUIPMENT AND STEPPED FORMING FOR POWERFUL SPINNING DIAMETER CONTRACTION OF CYLINDRICAL WORKPIECES[J].Journal of Guangdong Non-Ferrous Metals,1994,4(2):120-124. |
| |
| Authors: | LIANG Shuxian |
| |
| Affiliation: | Guangzhou Research Institute of Non-Ferrous Metals |
| |
| Abstract: | Spinning tests for stepped forming and diameter contraction of cylindrical workpieces are described. Emphasis is laid on investigation and practice for the multi-passes powerful spinning stepped forming process, the design of the finishing assembly equipment and the inspection of step wall thickness. |
| |
| Keywords: | spinning stepped forming diameter contraction |
| 本文献已被 CNKI 维普 等数据库收录！ |
