| 油缸二工位冷挤压工艺及模具设计 |
| |
| 引用本文： | 王志东,朱止芳,陈新波.油缸二工位冷挤压工艺及模具设计[J].模具工业,2002(4):48-51. |
| |
| 作者姓名： | 王志东 朱止芳 陈新波 |
| |
| 作者单位： | 1. 新乡千斤顶厂,河南,新乡,453002
2. 新乡内燃机厂,河南,新乡,453002 |
| |
| 摘 要： | 结合油缸二工位冷挤压(光)工艺及模具设计实践 ,论述了冷挤压 ,特别是二工位冷挤压的优越性及工艺特点 ,并对该工艺及模具设计作了较详细的介绍 ,可供千斤顶行业及其它内孔要求较高的长筒形零件加工参考。
|
| 关 键 词： | 千斤顶油缸 二工位冷挤压 双层预应力组合凹模 |
| 文章编号： | 1001-2168(2002)04-0048-04 |
| 修稿时间： | 2001年6月8日 |
Two-Position Cold Extrusion Technology for the Oil Cylinder and Design of the Die |
| |
| WANG Zhi_dong,ZHU Zhi_fang,Chen Xin_bo.Two-Position Cold Extrusion Technology for the Oil Cylinder and Design of the Die[J].Die & Mould Industry,2002(4):48-51. |
| |
| Authors: | WANG Zhi_dong ZHU Zhi_fang Chen Xin_bo |
| |
| Affiliation: | WANG Zhi_dong1,ZHU Zhi_fang2,Chen Xin_bo2 |
| |
| Abstract: | Relating with the experience and practices in the two_position cold extrusion technology for the oil cylinder and in the design of the die, cold extrusion, especially the superiority and the technological characteristics of two_position cold extrusion, was expounded. The technological process and the design of the die were stated in detail, which can serve as a reference for the hydraulic jack industry and for processing long canister_shaped parts with high requirement in their inner holes. |
| |
| Keywords: | oil cylinder of hydraulic jack two_position cold extrusion two_layer pre_stress combined matrix |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
