| PVC塑窗型材锯铣加工数控系统的开发和研制 |
| |
| 引用本文： | 冀玉梅,昃向博,艾长胜,李国平,王娜. PVC塑窗型材锯铣加工数控系统的开发和研制[J]. 组合机床与自动化加工技术, 2005, 0(9): 71-73 |
| |
| 作者姓名： | 冀玉梅 昃向博 艾长胜 李国平 王娜 |
| |
| 作者单位： | 济南大学,机械工程学院,济南,250022 |
| |
| 摘 要： | 依据塑窗型材锯铣加工工艺特点,在FANUC-0M系统的基础上从硬件配置到软件实现进行了深入的分析,开发和研制具有实际应用价值的专用数控加工系统.FANUC系统具有很好的可操作性,工作效率更高,位置控制精度高,对锯铣工作中心是比较适合的系统.重点是针对加工中心各项功能的完善以及设备总体性能的提高而对FANUC系统进行硬件二次开发,并通过软件编程实现塑窗型材锯铣加工的数控化.
|
| 关 键 词： | 塑窗型材 锯铣加工 I/O接口 |
| 文章编号： | 1001-2265(2005)09-0071-03 |
| 收稿时间： | 2005-03-22 |
| 修稿时间： | 2005-05-28 |
Design and Development of Interface of Numerical Control System of Sawing and Milling Machining Center for Plastic Door and Window |
| |
| JI Yu-mei,ZE Xiang-bo,AI Chang-sheng,LI Guo-ping,WANG Na. Design and Development of Interface of Numerical Control System of Sawing and Milling Machining Center for Plastic Door and Window[J]. Modular Machine Tool & Automatic Manufacturing Technique, 2005, 0(9): 71-73 |
| |
| Authors: | JI Yu-mei ZE Xiang-bo AI Chang-sheng LI Guo-ping WANG Na |
| |
| Abstract: | Abstract: According to the machining technics characteristic of Plastic Door and Window, we develop special NC machining system based on FANUC-0M system. The emphases is empoldering the FANUC system in allusion to perfect the function of the machining center and improve the capability of the equipment. And we can carry out NC machining of Plastic Door and Window by software programme. |
| |
| Keywords: | PMC |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
