首页 | 本学科首页   官方微博 | 高级检索  
     

齿轮径向自吸流体润滑方法的供油分析
引用本文:章易程,李汉良,田红旗,刘希玲,李蔚.齿轮径向自吸流体润滑方法的供油分析[J].润滑与密封,2010,35(2).
作者姓名:章易程  李汉良  田红旗  刘希玲  李蔚
作者单位:1. 中南大学交通运输工程学院,湖南长沙,410004
2. 中南大学机电工程学院,湖南长沙,410004
基金项目:湖南省自然科学基金项目,中南大学博士创新教育基金项目 
摘    要:针对齿轮传动的乏油现象,提出了一种新型的齿轮径向自吸流体润滑方法,从润滑与冷却两方面对整个啮合过程进行了供油的理论分析与计算。分析表明:螺杆泵的单导程容积大小受到与其同构件的齿轮转速与载荷的限制;冷却散热对螺杆泵单导程容积的影响与转速无关;螺杆泵单导程容积的设计应该按啮合过程中供油量的最大值设计。

关 键 词:齿轮  润滑  供油  自吸润滑

Oil-supply Analysis of Radial Self-inhaling Fluid Lubrication Method of Gear
Zhang Yicheng,Li Hanliang,Tian Hongqi,Liu Xiling,Li Wei.Oil-supply Analysis of Radial Self-inhaling Fluid Lubrication Method of Gear[J].Lubrication Engineering,2010,35(2).
Authors:Zhang Yicheng  Li Hanliang  Tian Hongqi  Liu Xiling  Li Wei
Affiliation:Zhang Yicheng1 Li Hanliang1 Tian Hongqi1 Liu Xiling1 Li Wei2(1.Traffic , Transportation Engineering College,Central South University,Changsha Hunan 410004,China,2.Mechanical , Electronic Engineering College,China)
Abstract:For the starved oil phenomenon of gear transmission,a new kind of gear radial self-inhaling lubrication method was introduced.The theoretcial analysis and calculation of supplying oil were completed throughout engagement process in lubricating and cooling,respectively.The analysis shows that the single lead volume of screw pump is confined to the revolving speed and load of gear which is combined with screw to form one component;and it has nothing to do with the velocity of the screw specially in cooling;th...
Keywords:gear  lubrication  supplying oil  self-inhaling lubrication  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号