首页 | 本学科首页   官方微博 | 高级检索  
     

焊接残余应力对7N01铝合金疲劳裂纹扩展影响
引用本文:孟金奎,王苹,马健瀟,方洪渊. 焊接残余应力对7N01铝合金疲劳裂纹扩展影响[J]. 焊接学报, 2019, 40(9): 25-29. DOI: 10.12073/j.hjxb.2019400230
作者姓名:孟金奎  王苹  马健瀟  方洪渊
作者单位:哈尔滨工业大学 先进焊接与连接国家重点试验室,哈尔滨,150001;哈尔滨工业大学 先进焊接与连接国家重点试验室,哈尔滨,150001;哈尔滨工业大学 先进焊接与连接国家重点试验室,哈尔滨,150001;哈尔滨工业大学 先进焊接与连接国家重点试验室,哈尔滨,150001
基金项目:国家自然科学基金资助项目(51605116);国家重点研发计划资助项目(2017YFB12013);哈尔滨工业大学先进焊接与连接国家重点试验室基金资助
摘    要:焊接残余应力作为平均应力影响裂纹扩展. 将残余应力与外载平均应力分离,通过构建典型焊接残余应力场,借助扩展有限元计算焊接残余应力场的应力强度因子. 开展了紧凑拉伸(CT)试样的疲劳扩展试验,基于Walker公式将裂纹尖端平均应力强度因子Km(静态量)和应力强度因子幅值ΔK(动态量)分离,获得疲劳裂纹扩展速率da/dN与Km及ΔK的非线性关系. 结果表明,不同外载荷下,应力比与裂纹长度为非线性关系;残余应力对裂纹扩展存在尺度效应:CT试样裂纹长度小于2 mm时,残余应力场明显影响疲劳裂纹扩展速率;当裂纹长度大于2 mm,外载荷为主导因素.

关 键 词:焊接残余应力  裂纹扩展  7N01铝合金  尺度效应
收稿时间:2019-01-20

Influence of welding residual stress in fatigue crack growth of 7N01 aluminum alloy
MENG Jinkui,WANG Ping,MA Jianxiao and FANG Hongyuan. Influence of welding residual stress in fatigue crack growth of 7N01 aluminum alloy[J]. Transactions of The China Welding Institution, 2019, 40(9): 25-29. DOI: 10.12073/j.hjxb.2019400230
Authors:MENG Jinkui  WANG Ping  MA Jianxiao  FANG Hongyuan
Affiliation:State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology, Harbin 150001, China
Abstract:Welding residual stress affects crack propagation as an average stress. Residual stress was separated from the average load stress. By constructing a typical welding residual stress field, the stress intensity factor of the welding residual stress field was calculated with the extended finite element method. The fatigue expansion test of the compact tensile (CT) specimen was carried out. Based on the Walker formula, the average stress intensity factor Km (static amount) at the crack tip and the magnitudeΔK (dynamic amount) of the stress intensity factor were separated to obtain the nonlinear relationship between da/dN versus Km andΔK. The results showed that the stress ratio was nonlinear with the crack length under different external loads and the residual stress had a scale effect on crack propagation. When the crack length of CT specimen was less than 2 mm, the residual stress field obviously affected the fatigue crack growth rate while the external load was the dominant factor, when the crack length of CT specimen was more than 2 mm.
Keywords:welding residual stress  fatigue crack propagation behavior  7N01 aluminum alloy  length scale
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《焊接学报》浏览原始摘要信息
点击此处可从《焊接学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号