| 补焊长度对P92补焊残余应力的影响 |
| |
| 引用本文： | 卜凡辉,徐连勇,韩永典,赵雷. 补焊长度对P92补焊残余应力的影响[J]. 焊接学报, 2019, 40(9): 19-24. DOI: 10.12073/j.hjxb.2019400229 |
| |
| 作者姓名： | 卜凡辉 徐连勇 韩永典 赵雷 |
| |
| 作者单位： | 天津大学 材料科学与工程学院,天津,300072;天津大学 材料科学与工程学院,天津 300072;天津市现代连接技术重点实验室,天津 300072 |
| |
| 基金项目： | 国家重点研发计划资助（2017YFB1303300） |
| |
| 摘 要： | 基于有限元模拟软件SYSWELD，通过建立P92钢板补焊过程的三维有限元模型，计算了补焊过程的温度场及应力场分布，讨论分析了不同补焊长度对残余应力分布的影响. 结果表明，无论是横向还是纵向残余应力，较大的拉应力水平都出现在焊缝和热影响区附近，同时在母材处应力值逐渐降低. 随着补焊长度的增加，横向残余应力在结构表面中心，热影响区和焊缝位置均存在下降趋势. 对于纵向残余应力来说，随着补焊长度的增加，应力值在焊缝位置呈下降趋势，而结构表面中心和热影响区变化较小.
|
| 关 键 词： | P92钢 残余应力 数值模拟 补焊 |
| 收稿时间： | 2018-04-15 |
Influence of repair length on residual stress in the repair weld of P92 steel |
| |
| BU Fanhui,XU Lianyong,HAN Yongdian and ZHAO Lei. Influence of repair length on residual stress in the repair weld of P92 steel[J]. Transactions of The China Welding Institution, 2019, 40(9): 19-24. DOI: 10.12073/j.hjxb.2019400229 |
| |
| Authors: | BU Fanhui XU Lianyong HAN Yongdian ZHAO Lei |
| |
| Affiliation: | 1.School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China2.School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China;Tianjin Key Laboratory of Advanced Joining Technology, Tianjin 300072, China |
| |
| Abstract: | Based on SYSWELD software, a 3-D finite element simulation is performed to investigate the temperature field and residual stress in the repair weld process of P92 plate. The results show that large tensile residual stresses are genetated in the repair weld and heat affected zone, and decrease in the base metal gradually. With the increase of repair length, the transverse residual stress decreased in the middle of plate surface, HAZ and weld metal.The longitudinal stess shows a declining trend in weld matal with the increase of repair length, while in the middle of plate surface and HAZ, it is affected a little by the repair length. |
| |
| Keywords: | P92 steel residual stress numerical simulation weld repair |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载免费的PDF全文 |
|
