| 唐钢烧结矿适宜FeO含量试验 |
| |
| 引用本文： | 李旺,张义明,王沧,周永宁,马林泉.唐钢烧结矿适宜FeO含量试验[J].河北冶金,2012(7):3-6. |
| |
| 作者姓名： | 李旺 张义明 王沧 周永宁 马林泉 |
| |
| 作者单位： | 河北钢铁集团唐钢公司炼铁厂,河北唐山,063016 |
| |
| 摘 要： | 在实验室条件下,研究了烧结矿中FeO含量与固体燃料配比之间的关系,分析了FeO含量对烧结矿机械强度、粒度组成、低温还原粉化性能、还原性能、熔滴性能的影响,认为在唐钢目前原料条件下适宜的烧结矿中FeO含量应控制在7.9%～9.2%。
|
| 关 键 词： | 烧结矿 FeO含量 试验 分析 |
TEST OF APROPRIATE CONTENT OF FeO FOR SINTER |
| |
| Li Wang
,
Zhang Yiming
,
Wang Cang
,
Zhou Yongning
,
Ma Linquan.TEST OF APROPRIATE CONTENT OF FeO FOR SINTER[J].Hebei Metallurgy,2012(7):3-6. |
| |
| Authors: | Li Wang Zhang Yiming Wang Cang Zhou Yongning Ma Linquan |
| |
| Affiliation: | (Ironworks,Tangshan Iron and Steel Company,Hebei Iron and Steel Group,Tangshan,Hebei,063016) |
| |
| Abstract: | Under the laboratory condition,the relation between FeO content in sinter and proportioning ratio of solid fuel is researched,the influence is analyzed of FeO content in sinter on its mechanical intensity,grain size distribution,powdering property of low-temperature reduction,reduction property,droplet property,considered the suitable content of FeO in sinter should be controlled within 7.9%~9.2% under the present raw material condition of Tang Steel. |
| |
| Keywords: | sinter FeO content test analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
