| 晶须硅在PA6改性中的应用研究 |
| |
| 引用本文： | 刘涛.晶须硅在PA6改性中的应用研究[J].塑料工业,2005,33(5):16-17. |
| |
| 作者姓名： | 刘涛 |
| |
| 作者单位： | 上海汇精亚纳米新材料有限公司,上海,201108 |
| |
| 摘 要： | 利用晶须硅纤维状的特性，对其填充于尼龙玻纤改性进行研究，结果表明，随晶须硅用量的增加，材料的拉伸强度、冲击强度、布氏硬度、耐热温度均得到提高；晶须硅可取代短玻纤使用，提高热变形温度、消除玻纤外露，降低收缩率及生产成本等。
|
| 关 键 词： | 晶须硅 尼龙 玻纤改性 |
| 文章编号： | 1005-5770(2005)05-0016-02 |
| 修稿时间： | 2005年1月23日 |
Research on Application of Silicon Whisker to Modification of PA6 |
| |
| LIU Tao.Research on Application of Silicon Whisker to Modification of PA6[J].China Plastics Industry,2005,33(5):16-17. |
| |
| Authors: | LIU Tao |
| |
| Abstract: | Based on the characteristics of silicon whisker,the research on the modification of PA6 by silicon whisker SiO_2-JX was made,and the result showed that the tensile strength,impact strength,Brinell Hardness,and heat resistance increased with the increase of the content of the whisker;SiO_2-JX could replace short glass fiber in the modification of PA6, improving the heat distortion temperature, removing the appearance of glass fiber, reducing shrinkage and the cost. |
| |
| Keywords: | SiO_2-JX PA6 Modification by Glass Fiber |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
