Design and fabrication of a novel polishing tool for finishing freeform surfaces in magnetic field assisted finishing (MFAF) process

Surface finish is a critical requirement for different applications in industries and research areas. Freeform surfaces are widely used in medical, aerospace, and automobile sectors. Magnetic field assisted finishing process can be used very efficiently to finish freeform surfaces. In this process, magnetorheological fluid is used as the polishing medium and permanent magnet is used to control its rheological properties to generate finishing force during polishing. To avail sufficient magnetic field in the finishing zone, it is necessary to design an optimum polishing tool. In the present study, a specially designed polishing tool is designed using a finite element based software package (Ansys Maxwell^®) based on Maxwell equations. At first, dimension of the permanent magnet is determined for designing optimum tool geometry. After that, dimension and configuration of the magnet fixture are optimized. A special type of metal named mu-metal which is a nickel-iron based alloy is selected for magnet fixture due to its magnetic-field shielding property. Mu-metal directs the magnetic flux lines in such a way that in the finishing zone the magnetic flux can be concentrated on the workpiece surface required for finishing. Also, the Mu-metal magnet fixture shields the magnetic field from outside environment so that MR fluid as well as any surrounding magnetic materials do not stick to the polishing tool. Experiments are carried out to validate the Maxwell simulation results to compare the magnetic flux distribution on the workpiece surface which shows good agreement between them. Also, finishing of flat titanium workpieces are carried out and it is found that the novel polishing tool has the capability to finish the workpieces in the nanometer range.