| 大齿轮齿距在机测量原理及技术研究 |
| |
| 引用本文： | 金嘉琦,李文龙,付景顺. 大齿轮齿距在机测量原理及技术研究[J]. 沈阳工业大学学报, 1999, 21(2): 98-100,103 |
| |
| 作者姓名： | 金嘉琦 李文龙 付景顺 |
| |
| 作者单位： | 1. 沈阳工业大学,机械工程学院,辽宁,沈阳,110023
2. 大连理工大学,机械工程系,辽宁,大连,110624 |
| |
| 摘 要： | 大齿轮齿距在机测量针对性较强，测量操作方便，测量齿轮的直径范围不受限制。运用异步驱动同步测量原理可实现齿距的连续测量操作，采用跨齿相对法及补齿测量法测量齿距累积误差有利于减少测量误差。
|
| 关 键 词： | 大齿轮 齿距 在机测量 补偿 齿轮 |
Study on principle and technology of measuring pitch of large gears on-line |
| |
| JIN Jia-qi,LI Wen-long,FU Jing-shun. Study on principle and technology of measuring pitch of large gears on-line[J]. Journal of Shenyang University of Technology, 1999, 21(2): 98-100,103 |
| |
| Authors: | JIN Jia-qi LI Wen-long FU Jing-shun |
| |
| Abstract: | Measuring pitch errors of large gears on-line is much convenient and has no limits of dimensions. The principle of non-synchro-drive and synchro-measurement is utilized to carry on continuous measurement. The spacing-tooth-method of measuring pitch accumulated errors of large gears is used to decrease measuring errors. Meanwhile, the compensating technology is applied to compensate measuring errors resulted from geometric eccentric, which can not be measured on-line, and the high accurate measurement is carried out. |
| |
| Keywords: | large gears pitch measurement on-line compensation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
