| 考虑外法向的钣金零件展开方法研究 |
| |
| 引用本文： | 吴建军,杨汉平. 考虑外法向的钣金零件展开方法研究[J]. 中国机械工程, 2006, 17(15): 1546-1549 |
| |
| 作者姓名： | 吴建军 杨汉平 |
| |
| 作者单位： | 西北工业大学现代设计与集成制造教育部重点实验室,西安,710072 |
| |
| 基金项目： | 高比容电子铝箔的研究开发与应用项目;航空基金 |
| |
| 摘 要： | 针对射线法展开钣金零件的不足，以几何映射原理和钣金零件三角网格信息为基础，兼顾零件带孔情况，建立了考虑外法向的射线法展开算法。展开实例表明，所提出的展开算法高效、实用，所得到的零件毛坯形状相对合理正确，为一步法快速分析优化提供了良好的初值。
|
| 关 键 词： | 网格 几何映射 射线法 法向 |
| 文章编号： | 1004-132X（2006）15-1546-04 |
| 收稿时间： | 2005-08-10 |
| 修稿时间： | 2005-08-10 |
Study on the Spreading Method of Sheet Metal Parts Considering Outside Normal |
| |
| Wu Jianjun,Yang Hanping. Study on the Spreading Method of Sheet Metal Parts Considering Outside Normal[J]. China Mechanical Engineering, 2006, 17(15): 1546-1549 |
| |
| Authors: | Wu Jianjun Yang Hanping |
| |
| Abstract: | For some disadvantages in the practice of existing radial spreading method, a new radial spreading approach with a concern of outside normal direction, which was based on geometric mapping method and triangle meshes, was developed to resolve blank design problem of sheet metal part with or without hole features. Through practical application, the effectiveness and usefulness of this ap- proach are evaluated, and the development result is more reasonable, meanwhile, the obtained blank shape will be a better initial values in the application of one-step quickly analysis and optimum. |
| |
| Keywords: | mesh geometric mapping radial spreading method normal |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
