| 压铸ZA—35合金的研究 |
| |
| 引用本文： | 于海朋,李荣德.压铸ZA—35合金的研究[J].沈阳工业大学学报,1997,19(2):26-29,32. |
| |
| 作者姓名： | 于海朋 李荣德 |
| |
| 作者单位： | 沈阳工业大学金属材料工程系 |
| |
| 摘 要： | 试验研究了压铸ＺＡ－３５合金的组织与性能。结果表明，变质处理改善了组织形态。热处理使过饱和相发生分解，从而获得强塑性，耐磨性均较好的压铸ＺＡ－３５合金。
|
| 关 键 词： | 压力铸造 显微组织 机械性能 锌铝合金 |
Research of Die Casting ZA-35 Alloy |
| |
| Yu Haipeng,Li Rongde,Song Changqin,Deng Honghua Wang Liang,Jin Chunlai.Research of Die Casting ZA-35 Alloy[J].Journal of Shenyang University of Technology,1997,19(2):26-29,32. |
| |
| Authors: | Yu Haipeng Li Rongde Song Changqin Deng Honghua Wang Liang Jin Chunlai |
| |
| Affiliation: | Dept. of Metal Material Engineering |
| |
| Abstract: | The structure and property of die casting ZA 35 alloy was studied. The results show that the microstructure was improved through the modification, the supersolubulied phases were decompounded by the heat treatment. Reasonable strength and plasticity and wear resistance are obtained in die casting ZA-35 alloy. |
| |
| Keywords: | ZA35 alloy die casting microstructure mechanical property |
| 本文献已被 CNKI 维普 等数据库收录！ |
