| 金属型铸造水嘴手柄缺陷分析 |
| |
| 引用本文： | 纪汉成. 金属型铸造水嘴手柄缺陷分析[J]. 特种铸造及有色合金, 1999, 0(6): 35-36 |
| |
| 作者姓名： | 纪汉成 |
| |
| 作者单位： | 江苏常柴集团金坛柴油机有限公司铸工车间,213200 |
| |
| 摘 要： | 对金属型铸造手柄的几种典型缺陷的形成机理和克服缺陷的对策及工艺方法进行了分析,认为应从模具设计、合金熔炼和工艺控制三个方面综合分析,全面加以解决,才能有效克服铸造缺陷,提高铸件质量和成品率。
|
| 关 键 词： | 手柄 金属型铸造 缺陷 |
| 修稿时间： | 1999-08-12 |
Analysis for Defects of Water Faucet Handle by Permanent Mold Casting |
| |
| Ji Hancheng. Analysis for Defects of Water Faucet Handle by Permanent Mold Casting[J]. Special Casting & Nonferrous Alloys, 1999, 0(6): 35-36 |
| |
| Authors: | Ji Hancheng |
| |
| Abstract: | Formation mechanism of some typical defects, method for overcoming defects and technique of handle by gravity die casting have been analyzed. Three aspects at the die design, alloy melting and technical control should be synthetically considered, fully solved, and then to overcome defects effectively and to improve casting quality and rate of end product. |
| |
| Keywords: | Handle Permanent Mold Casting Defect |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
