| 链路复用的跳频收发机射频前端设计 |
| |
| 引用本文： | 黄磊,余平,鲍景富,袁田.链路复用的跳频收发机射频前端设计[J].通信技术,2012(11):8-10,13. |
| |
| 作者姓名： | 黄磊 余平 鲍景富 袁田 |
| |
| 作者单位： | [1]电子科技大学电子工程学院,四川成都611731 [2]电子科技大学抗干扰国家重点实验室,四川成都611731 |
| |
| 摘 要： | 针对便携式跳频电台,设计了一种收发链路复用的收发信机射频前端。该收发信机射频前端可以提高抗干扰能力,达到降低功耗、减小设备体积的目的。详细介绍了收发信机射频前端的设计链路和硬件电路实现,设计中收发链路均采用二次变频结构,输出和输入频率在110～512 MHz之间连续可变。最后,对射频前端进行性能测试,测试结果表明所设计的射频前端实现了低相噪、低杂散、带内波动小和高速跳频等指标。
|
| 关 键 词： | 链路复用 跳频 收发信机 低相噪 低杂散 |
RF Front-end Design of Multiplex Link Transceiver |
| |
| HUANG Leia,YU Pingb,BAO Jing-Fua,YUAN Tian.RF Front-end Design of Multiplex Link Transceiver[J].Communications Technology,2012(11):8-10,13. |
| |
| Authors: | HUANG Leia YU Pingb BAO Jing-Fua YUAN Tian |
| |
| Affiliation: | b(a.College of Electronic Engineering;b.State Key Laboratory of Science and Technology on Communications,UESTC,Chengdu Sichuan 611731,China) |
| |
| Abstract: | In order to increase the anti-jamming capabilities and save power and size of the transceiver,the RF front-end of multiplex link frequency-hopping transceiver for portable frequency hopping radio is designed.Both the transmitter and receiver links in the design use the twice frequency conversion,and their output and input frequencies are continuously variable in between 110MHz and 512MHz.Finally,the test on the RF front-end performance is done,and the results show that this RF front-end meets all the goal requirements of low noise,low spur,small ripple in band and fast frequency hopping. |
| |
| Keywords: | multiplex link frequency-hopping transceiver low phase noise low spur |
| 本文献已被 维普 等数据库收录！ |
|
