首页 | 本学科首页   官方微博 | 高级检索  
     

基于NURBS建模计算形变目标RCS
引用本文:刘劲松,张小苗,张坚,金昊. 基于NURBS建模计算形变目标RCS[J]. 电子科技, 2010, 23(1): 1-4
作者姓名:刘劲松  张小苗  张坚  金昊
作者单位:西安电子科技大学,电子工程学院,陕西,西安,710071
基金项目:国家自然科学基金资助项目(60671056)
摘    要:采用非均匀有理B样条(NURBS)对目标进行建模,利用NURBS的局部特性模拟目标在复杂电磁环境中受到各种物理作用而产生的形变,再采用物理光学(PO)方法,在NURBS曲面上进行表面电流积分,计算出目标的RCS。NURBS建模方法可以更加精确地建立目标的几何模型;并在原模型的基础上,较方便地产生形变而不需要重新建模。文中分别计算了原模型和形变后模型的RCS,以研究形变对于目标散射特性的影响。原模型的RCS计算结果与参考文献一致,说明文中所研究方法的有效性。

关 键 词:非均匀有理B样条  形变  雷达散射截面  物理光学

RCS Calculation of Distorted Targets Based on NURBS Modeling
Liu Jinsong,Zhang Xiaomiao,Zhang Jian,Jin Hao. RCS Calculation of Distorted Targets Based on NURBS Modeling[J]. Electronic Science and Technology, 2010, 23(1): 1-4
Authors:Liu Jinsong  Zhang Xiaomiao  Zhang Jian  Jin Hao
Affiliation:School of Electronic Engineering;Xidian University;Xi'an 710071;China
Abstract:In this paper,targets are modeled by nonuniform rational B-spline(NURBS),and then the local property of NURBS is applied to modeling distortions.RCS of targets are calculated by physical optics(PO).NURBS can model the targets more accurately;and can make a model distorted without rebuilding it.RCS of some targets are calculated to determine the effects of distortions on these distorted targets and the results agree with those in the reference material.Also RCS of are simulated.
Keywords:NURBS  distortions  RCS  PO  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号