Preparation and properties of phase‐change heat‐storage UV curable polyurethane acrylate coating

Phase‐change heat‐storage UV curable polyurethane acrylate (PUA) coating was prepared by applying microencapsulated phase change materials (microPCMs) to PUA coating. MicroPCMs containing paraffin core with melamine‐formaldehyde shell were synthesized by in situ polymerization. The effect of stirring speed, emulsification time, emulsifier amount, and core/shell mass ratio on particle size, morphology, and phase change properties of the microPCMs was studied by using laser particle size analyzer, Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopic analysis, scanning electron microscopy, and differential scanning calorimetry. The results showed that the diameter of the microcapsules decreased with the increase of stirring speed, emulsification time, and emulsifier amount. When the mass ratio of emulsifier to paraffin is 6%, microcapsules fabricated with a core/shell ratio of 75/25 have a compact surface and a mean particle size of 30 μm. The sample made under the above conditions has a higher efficiency of microencapsulation than other samples and was applied to PUA coating. The dispersion of microPCMs in coating and heat‐storage properties of the coating were investigated. The results illustrated that the phase‐change heat‐storage UV curable PUA coating can store energy and insulate heat. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41266.