| 基于单相机旋转平台的螺纹目标三维重建系统 |
| |
| 引用本文： | 谢卫容,王心怡,程龙飞,吴庆华,陈久印,何涛.基于单相机旋转平台的螺纹目标三维重建系统[J].湖北工业大学学报,2014(1):93-94. |
| |
| 作者姓名： | 谢卫容 王心怡 程龙飞 吴庆华 陈久印 何涛 |
| |
| 作者单位： | [1]湖北工业大学现代制造质量工程重点实验室,湖北武汉430068 [2]湖北工业大学机械工程学院,湖北武汉430068 |
| |
| 基金项目： | 武汉市科技攻关计划项目（201152399735） |
| |
| 摘 要： | 根据实际检测中方便、快捷、直观的要求，通过CCD相机实时采集旋转平台上螺纹产品信息，通过数学计算进行坐标转换以及三维重建。此方法操作简单，检测精度高，能够检测出螺纹的大径、小径等参数。实验表明，通过标定后，测量的精度达到0．006mm，存在螺纹外观缺陷的产品可100％识别，其过判率小于0．1％。文中详细讲述了系统的构成、检测原理以及上位机软件的数据处理
|
| 关 键 词： | 螺纹检测 三维重建 数据处理 |
Single Camera and Rotating Platform for Threaded Target 3D Reconstruction System |
| |
| XIE Wei-rong,WANG Xin-yi,CHEN Long-fei,WU Qing-hua,CHEN Jiu yin,HE Tao.Single Camera and Rotating Platform for Threaded Target 3D Reconstruction System[J].Journal of Hubei University of Technology,2014(1):93-94. |
| |
| Authors: | XIE Wei-rong WANG Xin-yi CHEN Long-fei WU Qing-hua CHEN Jiu yin HE Tao |
| |
| Affiliation: | 1 Hubei Key Lab of Modern Manufacture Quality Engin.,Wuhan 430068,China; 2 School of Mechanical Engin., Hubei Univ. of Tech., Wuhan 430068, China) |
| |
| Abstract: | Thread is a kind of product most widely used in manufacturing. The quality of the thread directly affects the stability and the reliability of the products that use it. According to the actual testing require- ments of convenience, the paper put forward a method of threaded target 3 d reconstruction based on the single camera rotating platform. With its advantages of simple operation, high accuracy, this method can detect the parameters of major diameter and minor diameter. This paper describes the composition of the system, detection principle and the processing of PC data software in details. |
| |
| Keywords: | thread detection 3 d reconstruction data processing |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
