| 弧焊机器人起始焊接位置图像识别与定位 |
| |
| 引用本文： | 陈希章,陈善本.弧焊机器人起始焊接位置图像识别与定位[J].焊接学报,2009,30(4):17-20. |
| |
| 作者姓名： | 陈希章 陈善本 |
| |
| 作者单位： | 1. 江苏大学,材料科学与工程学院,江苏,镇江,212013
2. 上海交通大学,焊接工程研究所,上海,200030 |
| |
| 基金项目： | 国家自然科学基金资助项目(50575144);;江苏大学高级人才启动基金资助项目(07JDG085);;江苏大学创新团队基金资助项目(CLXY03) |
| |
| 摘 要： | 起始焊接位置的识别和定位是实现机器人智能化焊接的第一步,在分析焊缝接头类型的基础上给出了起始焊位的定义.采用CCD摄像机在自然光条件下获得待焊工件图像,由起始焊位的定义分析了起始焊位识别的方法.提出一种局部范围内由粗到细的两步精确定位方法.首先求取焊缝和工件边界交点作为初始值.第二步以该点为中心建立一个小窗口,在此局部范围内检测角点.根据设定的判断标准,可充分利用原图像的丰富信息和边缘提取后的结构化信息.结果表明,对规则焊缝,初始值与实际初始焊位能很好吻合,而对不规则的焊缝,初始值偏离实际位置.文中提出的两步定位方法则能准确的识别和定位具有明显边界的规则和不规则焊缝的初始焊接位.
|
| 关 键 词： | 起始焊位 图像识别 弧焊机器人 |
| 收稿时间： | 2008/1/28 0:00:00 |
Recognition and positioning of start welding position for arc welding robot |
| |
| CHEN Xizhang and CHEN Shanben.Recognition and positioning of start welding position for arc welding robot[J].Transactions of The China Welding Institution,2009,30(4):17-20. |
| |
| Authors: | CHEN Xizhang and CHEN Shanben |
| |
| Affiliation: | 1.School of Material Science and Engineering;Jiangsu University;Zhenjiang 212013;Jiangsu;China;2.Institute of Welding Engineering;Shanghai Jiao Tong University;Shanghai 200030;China |
| |
| Abstract: | The recognition and positioning of start welding position(SWP) is the first step to realize intelligent robot welding.The definition of SWP is given based on the analysis of seam type.The macro-scopical images of workpieces to be welded are snapped by CCD camera in a relativly large range without additional light.The recognizing methods of SWP are analyzed according to its definition.A two-step method that from coarse to fine is proposed to recognize the SWP accurately.The first step is to solve the curve f... |
| |
| Keywords: | start welding position image recognition are welding robot |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《焊接学报》浏览原始摘要信息 |
|
点击此处可从《焊接学报》下载全文 |
