| 基于ANSYS Workbench的带夹套卧式储罐分析 |
| |
| 引用本文： | 贾明霞,钟佩思,杨梅,张晓东,吝伟伟,吕晓东.基于ANSYS Workbench的带夹套卧式储罐分析[J].食品与机械,2016,32(2):63-66. |
| |
| 作者姓名： | 贾明霞 钟佩思 杨梅 张晓东 吝伟伟 吕晓东 |
| |
| 作者单位： | 山东科技大学先进制造技术研究中心，山东 青岛 266590 |
| |
| 摘 要： | 以带夹套的卧式储罐为研究对象,应用ANSYS Workbench有限元分析软件,通过静力分析方法,得出在充满物料、雪载荷下,加强筋对储罐的作用非常显著,其变形及应力分布相似;通过响应谱分析方法,得到在地震载荷下,储罐在鞍座处出现应力最大值,低于材料的许用应力。验证储罐的可靠性,并提出优化方法。
|
| 收稿时间： | 2015/12/10 0:00:00 |
Analysis of horizontal tank with jacket based on ANSYS Workbench |
| |
| JIAMingxi,ZHONGPeisi,YANGMei,ZHANGXiaodong,LINWeiwei,LVXiaodong.Analysis of horizontal tank with jacket based on ANSYS Workbench[J].Food and Machinery,2016,32(2):63-66. |
| |
| Authors: | JIAMingxi ZHONGPeisi YANGMei ZHANGXiaodong LINWeiwei LVXiaodong |
| |
| Affiliation: | Advanced Manufacturing Technology Center, Shandong University of Science and Technology, Qingdao, Shandong 266590, China |
| |
| Abstract: | Targeting at the horizontal tank with jacket from a certain project as the research subject, applying the finite element software ANSYS Workbench, the structural static analysis showed that under the full load and the snow condition the deformation and stress were similar and the reinforced rib had significantly effect on the tank. Meantime, the response spectrum analysis told that under the seismic condition the maximum stress occurred in the saddle, which was lower than the allowable stresses of the materials. The reliabilities of the tank were validated, and optimization method was presented. |
| |
| Keywords: | jacket reinforced rib structural static analysis response spectrum analysis stress |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《食品与机械》浏览原始摘要信息 |
|
点击此处可从《食品与机械》下载全文 |
|
