首页 | 本学科首页   官方微博 | 高级检索  
     

BBSM烧结助剂对低温烧结PTCR陶瓷性能的影响
引用本文:孔明日,姜胜林,涂文芳,黄兆祥. BBSM烧结助剂对低温烧结PTCR陶瓷性能的影响[J]. 电子元件与材料, 2009, 28(11). DOI: 10.3969/j.issn.1001-2028.2009.11.007
作者姓名:孔明日  姜胜林  涂文芳  黄兆祥
作者单位:1. 华中科技大学,电子科学与技术系,湖北,武汉,430074;金策工业综合大学,半导体研究所,平壤,999093
2. 华中科技大学,电子科学与技术系,湖北,武汉,430074
基金项目:国家"863"计划资助项目 
摘    要:为了提高低温烧结BaTiO3基热敏陶瓷的PTC效应,提出在BaO-B2O3-SiO2烧结助剂中加入MnO(以Mn(NO3)2形式加入)的方法,研究了BaO-B2O3-SiO2-MnO(BBSM)烧结助剂对Y3+掺杂BaTiO3基热敏陶瓷的低温烧结和PTC特性的影响。结果表明:含有x[Mn(NO3)2]为0.06%的BBSM烧结助剂的样品,在1050℃保温3h下烧结后,其室温电阻率为306Ω·cm,升阻比为4.23×103。

关 键 词:Y3+掺杂BaTiO3  BaO-B2O3-SiO2-MnO  低温烧结  PTC效应

Influence of BBSM sintering aid on the properties for PTC thermistor ceramics sintered at low temperature
KONG Mingri,JIANG Shenglin,TU Wenfang,HUANG Zhaoxiang. Influence of BBSM sintering aid on the properties for PTC thermistor ceramics sintered at low temperature[J]. Electronic Components & Materials, 2009, 28(11). DOI: 10.3969/j.issn.1001-2028.2009.11.007
Authors:KONG Mingri  JIANG Shenglin  TU Wenfang  HUANG Zhaoxiang
Abstract:In order to enhance the PTC effect of BaTiO_3 based thermistor ceramics sintered at low temperature, adding MnO (as Mn(NO_3)_2) in BaO-B_2O_3-SiO_2 sintering aid was proposed. And the effects of BaO-B_2O_3-SiO_2-MnO (BBSM)sintering aids on the low temperature sinter and PTC properties of BaTiO_3 based thermistor ceramics doped with Y~(3+) were investigated. The results indicate that the samples with x[Mn(NO_3)_2] = 0.06% in the BBSM sintering aids can provide the room-temperature resistivity of 306 Ω·cm and jump range of 4.23×10~3. The sample is sintered at 1 050 ℃ for 3 h.
Keywords:BaO-B2O3-SiO2-MnO
本文献已被 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号