| 碳纤维与玻璃钢风力机叶片动力特性的对比分析 |
| |
| 引用本文： | 张建平,张智伟,纪海鹏,韩熠. 碳纤维与玻璃钢风力机叶片动力特性的对比分析[J]. 上海电力学院学报, 2019, 35(6): 531-534,538 |
| |
| 作者姓名： | 张建平 张智伟 纪海鹏 韩熠 |
| |
| 作者单位： | 上海电力学院,上海绿色环保能源有限公司,上海电力学院,上海电力学院 |
| |
| 基金项目： | 上海市科学技术委员会项目（18DZ1202105，18DZ1202302）。 |
| |
| 摘 要： | 以NREL 5 MW风力机叶片为研究对象,分析了碳纤维与玻璃钢(GRP)材料的叶片和风轮在静止工况下的模态频率与振型,对比了两种叶片在额定工况下的应力与位移。研究结果表明:两种材料的叶片均表现出较高的抗扭能力,碳纤维风轮的抗摆振能力更强;碳纤维与GRP叶片位移及应力分布相似,刚度较低的GRP叶片使得其位移响应值很大、应力响应值相对较小。
|
| 关 键 词： | 碳纤维 玻璃钢 风力机叶片 位移 应力 |
| 收稿时间： | 2018-12-19 |
Comparative Analysis of Dynamic Characteristics Between Carbon Fiber and GRP Wind Turbine Blades |
| |
| ZHANG Jianping,ZHANG Zhiwei,JI Haipeng and HAN Yi. Comparative Analysis of Dynamic Characteristics Between Carbon Fiber and GRP Wind Turbine Blades[J]. Journal of Shanghai University of Electric Power, 2019, 35(6): 531-534,538 |
| |
| Authors: | ZHANG Jianping ZHANG Zhiwei JI Haipeng HAN Yi |
| |
| Affiliation: | Shanghai University of Electric Power, Shanghai 200090, China,Shanghai Green Environmental Protection Energy Co., Ltd., Shanghai 200433, China,Shanghai University of Electric Power, Shanghai 200090, China and Shanghai University of Electric Power, Shanghai 200090, China |
| |
| Abstract: | Taking NREL 5 MW wind turbine blades as the research object,the modal frequencies and shapes of carbon fiber and glass reinforced plastic (GRP) blades and wind turbines under static conditions are analyzed,and the stresses and the displacements of the two blades under rated conditions are compared.The results show that the blades of both materials exhibit high torsion resistance,and the carbon fiber wind wheel has stronger anti-shimmy ability.The displacement and stress distributions of carbon fiber and GRP blades are similar,and the lower stiffness of GRP blades makes the displacement response value larger and the stress response value smaller. |
| |
| Keywords: | carbon fiber glass reinforced plastic wind turbine blades displacement stress |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《上海电力学院学报》浏览原始摘要信息 |
|
点击此处可从《上海电力学院学报》下载全文 |
|
