Effect of Ce on 5 wt% Ni/ZSM-5 catalysts in the CO2 reforming of CH4 reaction

The aim of this study is to investigate the promotional effect of Ce on Ni/ZSM-5 catalysts in the CO₂ reforming of CH₄ reaction. The evaluation of the catalytic performances of the composite catalysts was conducted in a fixed-bed reactor at atmospheric pressure. The influencing factors, including temperature, Ni and Ce loadings, molar feed ratio of CO₂/CH₄, and time-on-stream (TOS), were investigated. The characteristics of the catalysts were checked with Brunauer-Emmett-Teller (BET) analysis, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). The reduction and the basic properties of the composite catalysts were elucidated by temperature-programmed reduction by H₂ (H₂-TPR) and temperature-programmed desorption of CO₂ (CO₂-TPD), respectively. The reactivity of deposited carbon was studied by sequential temperature-programmed surface reaction of CH₄ (CH₄-TPSR) and temperature-programmed oxidation using CO₂ and O₂ (CO₂-TPO and O₂-TPO). Results indicate that higher CH₄ conversion, H₂ selectivity, and desired H₂/CO ratio for 5 wt% Ni & 5 wt% Ce/ZSM-5 could be achieved with CO₂/CH₄ feed ratio close to unity over the temperature range of 500–900 °C. Moreover, the addition of Ce could not only promote CH₄ decomposition for H₂ production but also the gasification of deposited carbon with CO₂. The dispersion of Ni particles could be improved with Ce presence as well. A partial reduction of CeO₂ to CeAlO₃ was observed from XPS spectra over 5 wt% Ni & 5 wt% Ce/ZSM-5 after H₂ reduction and 24 h CO₂–CH₄ reforming reaction. Benefiting from the introduction of 5 wt% Ce, the calculated apparent activation energies of CH₄ and CO₂ over the temperature range of 700–900 °C could be reduced by 30% and 40%, respectively.