首页 | 本学科首页   官方微博 | 高级检索  
     

氙灯泵浦的高功率Cr,Tm,Ho:YAG脉冲激光器
引用本文:陈慧敏 刘磊 李家泽. 氙灯泵浦的高功率Cr,Tm,Ho:YAG脉冲激光器[J]. 光电子.激光, 2005, 16(4): 433-435
作者姓名:陈慧敏 刘磊 李家泽
作者单位:1. 北京理工大学光电工程系,北京,100081
2. 华北光电技术研究所,北京,100015
摘    要:提出了双路Cr,Tm,Ho:YAG激光器的设计方案,通过单片机对激光电源和步进电机(间接控制电机带动的旋转全反镜)进行控制,实现轮流出光的两路激光器合光路输出。在单脉冲输入能量100J、重频20Hz情况下,激光器输出功率达到35.4w,光纤末端输出功率为22.7w,总的耦合效率为64%,而且此方案并不局限于同种波长激光的耦合。

关 键 词:YAG脉冲激光器 氙灯泵浦 Cr Tm 高功率 YAG激光器 输出功率 设计方案 控制电机 步进电机 激光电源 输入能量 耦合效率 单片机 单脉冲 重频 光纤 波长
文章编号:1005-0086(2005)04-0433-03

High-power Cr,Tm,Ho:YAG Pulse Lasers Pumped by Xenon-lamp
CHEN Hui-min. High-power Cr,Tm,Ho:YAG Pulse Lasers Pumped by Xenon-lamp[J]. Journal of Optoelectronics·laser, 2005, 16(4): 433-435
Authors:CHEN Hui-min
Affiliation:CHEN Hui-min~
Abstract:The Cr,Tm,Ho:YAG laser device was provided for co-axial positioning of two laser beams along a single axis.The output of each laser rod is combined in turn and interleaved into a single output beam by using a rotatable reflector.The rotary rate of the stepping motor and the pump currents of two lasers are controlled by a single chip microcomputer.The output power is 35.4 W and the end of fiber is 22.7 W when input pump energy is 100 J and repetition frequency is 20 Hz.The coupling efficiency is 64%.This method is not only suitable for the same wavelengths,but also suitable for two different wavelengths.
Keywords:Cr  Tm  Ho:YAG lasers  high-power lasers  thermal lensing effect  stepping motor
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《光电子.激光》浏览原始摘要信息
点击此处可从《光电子.激光》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号