Modeling and optimization of hard turning of X38CrMoV5-1 steel with CBN tool: Machining parameters effects on flank wear and surface roughness |
| |
Authors: | Hamdi Aouici Mohamed Athmane Yallese Brahim Fnides Kamel Chaoui Tarek Mabrouki |
| |
Affiliation: | 1.ENST-ex CT siège DG. SNVI,Rouiba,Algérie;2.Mechanics and Structures Research Laboratory (LMS),University of Guelma,Guelma,Algeria;3.Mechanics of Materials and Plant Maintenance Research Laboratory (LR3MI),Badji Mokhtar University of Annaba,Badji Mokhtar,Algeria;4.CNRS, INSA — Lyon, LaMCoS, UMR5259,Université de Lyon,Lyon,France |
| |
Abstract: | The present study, aims to investigate, under turning conditions of hardened AISI H11 (X38CrMoV5-1), the effects of cutting
parameters on flank wear (VB) and surface roughness (Ra) using CBN tool. The machining experiments are conducted based on the response surface methodology (RSM). Combined effects
of three cutting parameters, namely cutting speed, feed rate and cutting time on the two performance outputs (i.e. VB and Ra), are explored employing the analysis of variance (ANOVA). Optimal cutting conditions for each performance level are established
and the relationship between the variables and the technological parameters is determined using a quadratic regression model.
The results show that the flank wear is influenced principally by the cutting time and in the second level by the cutting
speed. Also, it is that indicated that the feed rate is the dominant factor affecting workpiece surface roughness. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|