| 胶印机输墨系统的动态仿真 |
| |
| 引用本文： | 李淑娟,张成新,詹仪. 胶印机输墨系统的动态仿真[J]. 中国印刷与包装研究, 2010, 2(6) |
| |
| 作者姓名： | 李淑娟 张成新 詹仪 |
| |
| 作者单位： | 曲阜师范大学印刷学院,日照,273165 |
| |
| 基金项目： | 曲阜师范大学校青年基金，山东省自然科学基金，山东省教育厅项目 |
| |
| 摘 要： | 通过分析墨路中油墨在墨辊上分配、传递的机理,把油墨在墨路中的每一次分配视为一个节点,建立了描述节点之间油墨分配原理和传输过程的数学模型,从而得到整个系统的数学模型,并给出了利用simulink对其进行动态仿真的方法.通过对两种典型的墨路系统进行仿真,得到其动态性能和墨层厚度变化规律,比较分析出墨路结构和滚筒空当对输墨性能的影响,验证了本方法的有效性,为墨路系统的设计研究提供了一种有效工具.
|
| 关 键 词： | 输墨系统 动态性能 连续系统 节点 Simulink |
Dynamic Simulation of Offset Inking System |
| |
| LI Shujuan,ZHANG Chengxin,ZHAN Yi. Dynamic Simulation of Offset Inking System[J]. China Printing and Packaging Study, 2010, 2(6) |
| |
| Authors: | LI Shujuan ZHANG Chengxin ZHAN Yi |
| |
| Abstract: | Based on the mechanism analysis of ink transferring and allocating on inking rollers,each allocation of ink was as a node.For each node,the mathematics models of reflecting the law of ink transferring and allocating were established,and then the model of the whole system was got.The dynamic simulation method of inking system using simulink was given.By simulating,the dynamic performance and ink distribution of two typical inking systems were obtained.Through comparing,the influence of the structure and cylinder gap on inking performance was analyzed and the validity of this method was verified.It will be a power tool for inking system design. |
| |
| Keywords: | Inking system Dynamic performance Continuous system Node Simulink |
| 本文献已被 万方数据 等数据库收录！ |
|
