| IF钢连铸增碳控制 |
| |
| 引用本文： | 庞在刚,刘柏松,陈斌. IF钢连铸增碳控制[J]. 连铸, 2015, 34(3): 1-3. DOI: 10.13228/j.boyuan.issn1005-4006.20140096 |
| |
| 作者姓名： | 庞在刚 刘柏松 陈斌 |
| |
| 作者单位： | 首钢技术研究院，北京 100043 |
| |
| 摘 要： | 结合IF钢连铸工艺过程，对影响增碳的主要因素进行了分析。结果表明：中间包覆盖剂对增碳量有很大的影响，必须控制中间包覆盖剂碳质量分数小于1%；控制中间包耐材碳质量分数和加覆盖剂操作，可以大大减少增碳量，降低成品碳质量分数。
|
| 关 键 词： | IF钢 增碳 连铸 |
Control of carbon pick-up during continuous casting |
| |
| PANG Zai-gang,LIU Bai-song,CHEN Bin. Control of carbon pick-up during continuous casting[J]. CONTINUOUS CASTING, 2015, 34(3): 1-3. DOI: 10.13228/j.boyuan.issn1005-4006.20140096 |
| |
| Authors: | PANG Zai-gang LIU Bai-song CHEN Bin |
| |
| Affiliation: | Shougang Research Institute of Technology, Beijing, 100043,China |
| |
| Abstract: | The main factors that influence the carbon pick up are analyzed according with Interstitial Free (IF) Steel continuous casting process. The results show that tundish covering flux influences the carbon pick-up greatly, the carbon content must be controlled below 1%.Control of carbon content of tundish refractory and adding covering flux operation can sharply decrease carbon pick-up and consequently decreasing the product carbon content. |
| |
| Keywords: | Interstitial Free (IF) steel Carbon pick up Continuous casting |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《连铸》浏览原始摘要信息 |
|
点击此处可从《连铸》下载全文 |
