首页 | 本学科首页   官方微博 | 高级检索  
     

ZnO_p/Cu复合材料的制备工艺与物理性能的研究
引用本文:王军红,崔春翔,王清周,刘福才,胡宇鹏,李忠会. ZnO_p/Cu复合材料的制备工艺与物理性能的研究[J]. 稀有金属材料与工程, 2009, 38(Z1)
作者姓名:王军红  崔春翔  王清周  刘福才  胡宇鹏  李忠会
作者单位:河北工业大学,天津,300130
基金项目:教育部骨干教师资助计划项目,河北省自然科学基金 
摘    要:采用粉末冶金法制备含不同质量分数ZnO的铜基复合材料,并对材料的密度、硬度和电导率进行考察.结果表明,与相同工艺制备的紫铜相比,复合材料的硬度有很大程度的提高,而电导率降低不明显.随着ZnO质量分数的增加,材料的密度和电导率都呈下降趋势,而硬度先增大后减小.当ZnO含量为10%时,复合材料具有最好的综合性能,密度达98%以上,HV硬度、电导率分别达980 MPa和41.5 MS/m.

关 键 词:高强高导电  铜基复合材料  粉末冶金

Manufacturing Process and Properties of ZnO Strengthened Copper-based Composite Material
Wang Junhong,Cui Chunxiang,Wang Qingzhou,Liu Fucai,Hu Yupeng,Li Zhonghui. Manufacturing Process and Properties of ZnO Strengthened Copper-based Composite Material[J]. Rare Metal Materials and Engineering, 2009, 38(Z1)
Authors:Wang Junhong  Cui Chunxiang  Wang Qingzhou  Liu Fucai  Hu Yupeng  Li Zhonghui
Affiliation:Wang Junhong,Cui Chunxiang,Wang Qingzhou,Liu Fucai,Hu Yupeng,Li Zhonghui (Hebei University of Technology,Tianjin 300130,China)
Abstract:The copper matrix composites strengthened by ZnO Particles of different mass fraction were fabricated by powder metallurgy. And the density,hardness and electrical conductivity of the composites were studied in this paper. The results show that comparing with the pure Cu made by the same technic,there is an obvious increase of the hardness in this composite material,while the decrease of its electrical conductivity is not obvious. With the increase of the mass fraction of ZnO,both the density and the electr...
Keywords:high-strength and high-conductivity  copper based composite material  powder metallurgy  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号