| 超声波线切割机床导向轮的设计 |
| |
| 引用本文： | 张莹,李玉潮,张辽远. 超声波线切割机床导向轮的设计[J]. 机械工程师, 2007, 0(7): 110-112 |
| |
| 作者姓名： | 张莹 李玉潮 张辽远 |
| |
| 作者单位： | 1. 沈阳理工大学,沈阳,110168
2. 沈阳理工大学,沈阳,110168;长春理工大学,长春,130022 |
| |
| 摘 要： | 分析了超声波线切割机床的加工原理和线锯在导向轮中的传播特性,建立了等截面弯曲杆的纵振动方程及其通解.对超声波线切割加工机床中关键部件导向轮,在结构和声学方面进行了参数设计和计算,得到了超声波线切割机床中导向轮的结构和尺寸必须满足一定的条件,才能使超声波线切割达到振动切割的目的和要求.
|
| 关 键 词： | 超声波 线切割 硬脆材料 振动切削 导向轮 超声波 线切割机床 导向轮 参数设计 Machine Tool Cutting Linear Ultrasonic Vibration Wheel Pilot 振动方程 条件 尺寸 计算 和声学 结构 关键部件 加工机床 通解 曲杆 |
| 文章编号： | 1002-2333(2007)07-0110-03 |
| 修稿时间： | 2006-11-17 |
Design of Pilot Wheel in Ultrasonic Vibration Linear Cutting Machine Tool |
| |
| ZHANG Ying,LI Yu-chao,ZHANG Liao-yuan. Design of Pilot Wheel in Ultrasonic Vibration Linear Cutting Machine Tool[J]. Mechanical Engineer, 2007, 0(7): 110-112 |
| |
| Authors: | ZHANG Ying LI Yu-chao ZHANG Liao-yuan |
| |
| Affiliation: | 1.Shenyang Ligong University, Shenyang 110168, China; 2.Changchun University of Science and Technology, Changchun, 130022, China |
| |
| Abstract: | Set up the vertial vibration equation and result of same section cure horn depending on the principle of ultrasonic spread abroad the pilot wheel. The pilot wheel was one of the key parts of ultrasonic vibration linear cutting machine tool, the structure and dimension of it must satisfied certain qualification, this was based on parameter design and calculate of pilot wheel, thus the aim and request of vibratory cutting would be achieved. |
| |
| Keywords: | ultrasonic linear cutting hard-brittle material pilot wheel vibratory cutting |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
