| 高速滚珠丝杠进给系统机械性能分析 |
| |
| 引用本文： | 韩阳阳,李亚芹.高速滚珠丝杠进给系统机械性能分析[J].机械工程师,2007(6):31-32. |
| |
| 作者姓名： | 韩阳阳 李亚芹 |
| |
| 作者单位： | 1. 佳木斯大学,建筑工程学院,黑龙江,佳木斯,154007
2. 佳木斯大学,机械工程学院,黑龙江,佳木斯,154007 |
| |
| 基金项目： | 黑龙江省教育厅科研基金
,
黑龙江省研究生创新科研项目 |
| |
| 摘 要： | 提出了在高速滚珠丝杠进给系统中,存在着加速状态时由滚珠丝杠驱动时屈服形变和工作台与滚珠丝杠联结件刚度引起定位精度误差的问题.对滚珠丝杠进给系统机械模型进行了合理的分析.最后指出解决问题的研究方向.
|
| 关 键 词： | 高速加工 滚珠丝杠进给系统 屈服型变 滚珠丝杠 进给系统 机械性能分析 Systems Drive Analysis Property 方向 研究 机械模型 问题 精度误差 定位 刚度 结件 工作台 形变 驱动 加速状态 存在 |
| 文章编号： | 1002-2333（2007）06-0031-02 |
| 修稿时间： | 2007-01-19 |
Mechanical Property Analysis of High-speed Ball-screw Drive Systems |
| |
| HAN Yang-yang,LI Ya-qin.Mechanical Property Analysis of High-speed Ball-screw Drive Systems[J].Mechanical Engineer,2007(6):31-32. |
| |
| Authors: | HAN Yang-yang LI Ya-qin |
| |
| Affiliation: | 1.College of Architecture Engineering, Jiamusi University, Jiamusi 154007, China; 2.College of Mechanical Engineering, Jiamusi University, Jiamusi 154007, China |
| |
| Abstract: | In this paper,problem of orientation precision error induced by elastic deformation of table and connect stiffness between table and ball-screw is put forward when table is driven by ball-screw in the course of high-speed orientation.Mechanical model is analysed and on ball-screw drive systems in high-speed motion.The prospect of studies therein were also introduced about the problem is solved. |
| |
| Keywords: | high-speed machining ball-screw drive systems elastic deformation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
