| 虚拟样机技术在双转轴支撑机构设计中的应用 |
| |
| 引用本文： | 李强,高小荣,董国庆. 虚拟样机技术在双转轴支撑机构设计中的应用[J]. 机械工程师, 2007, 0(7): 39-41 |
| |
| 作者姓名： | 李强 高小荣 董国庆 |
| |
| 作者单位： | 中国航空工业空气动力研究院,哈尔滨,150001 |
| |
| 摘 要： | 基于虚拟样机技术及仿真软件平台Pro/E,设计开发了风洞试验模型的双转轴支撑机构,建立了角度控制的数学模型,实现了机构的虚拟样机设计和运动学仿真,获取了被测试验模型运动情况的运动参数曲线,并对双转轴机构实施了干涉的动态检查,为双转轴机构设计方案的交流与评估以及双转轴机构的制造与应用奠定了基础.
|
| 关 键 词： | 虚拟样机技术 双转轴支撑机构 设计 运动学仿真 虚拟样机技术 转轴机构 支撑机构 机构设计 应用 Mechanism Supporting Design Technology Virtual Prototype 制造 评估 交流 设计方案 动态检查 干涉 实施 参数曲线 情况 运动 |
| 文章编号： | 1002-2333(2007)07-0039-03 |
| 修稿时间： | 2007-03-08 |
Application of Virtual Prototype Technology in Design of Two-shaft Supporting Mechanism |
| |
| LI Qiang,GAO Xiao-rong,DONG Guo-qing. Application of Virtual Prototype Technology in Design of Two-shaft Supporting Mechanism[J]. Mechanical Engineer, 2007, 0(7): 39-41 |
| |
| Authors: | LI Qiang GAO Xiao-rong DONG Guo-qing |
| |
| Affiliation: | Chinese Aerodynamics Research Institute of Aeronautics, Harbin 150001, China |
| |
| Abstract: | One two-shaft supporting mechanism for wind tunnel test model was developed based on the virtual prototype technology and simulation software platform Pro/E. The virtual prototype design and kinematics simulation have been realized after mathematic model of control angle was build. And tile motion parameter curve of the measured model has been analyzed. Olherwise dynamic check of interference was applied. The technology will make the important significance upon the evaluation, manufacture and application of the lwo-shafl supporting mechanism. |
| |
| Keywords: | virtual prototype technology two-shaft supporting mechanism design kinematics simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
