| 63寸超大平板电视机前机壳注射模设计 |
| |
| 引用本文： | 杨海明.63寸超大平板电视机前机壳注射模设计[J].模具制造,2007,7(10):42-45. |
| |
| 作者姓名： | 杨海明 |
| |
| 作者单位： | 厦门海盛模具有限公司(厦门大型模具研究中心),福建厦门,361001 |
| |
| 摘 要： | 针对大型平板电视机壳注射模设计的难题,应用先进的CAE技术及气辅技术,结合63寸前机壳模具实例,对其模具的设计方法、理念、结构等方面进行阐述.
|
| 关 键 词： | 平板电视 流动分析 气辅注射成型 |
Design of the Injection Mold for Front Case of 63 Inch Super Large Panel TV Set |
| |
| Yang Haiming.Design of the Injection Mold for Front Case of 63 Inch Super Large Panel TV Set[J].Die & Mould Manufacture,2007,7(10):42-45. |
| |
| Authors: | Yang Haiming |
| |
| Abstract: | Accroding to the difficult points of the injection mold for the large panel TV set case. Using the advanced CAE technology and air-assisted injection mold, the methods, the concept, the structure of mold design were explained. |
| |
| Keywords: | panel TV set flowing analysis gas-assisted injection molding |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
