| 单螺杆压缩机星轮夹具的设计与分析 |
| |
| 引用本文： | 孙兴伟,贾亚楠,王可,王慧明.单螺杆压缩机星轮夹具的设计与分析[J].机床与液压,2012,40(16):36-38. |
| |
| 作者姓名： | 孙兴伟 贾亚楠 王可 王慧明 |
| |
| 作者单位： | 沈阳工业大学机械工程学院,辽宁沈阳,110870 |
| |
| 摘 要： | 分析并设计了单螺杆压缩机星轮的夹具,应用三维建模软件建立了星轮夹具的三维实体模型,并利用有限元分析软件对不同厚度的夹具在工作过程中产生的位移变化进行了分析及比较.最终确定了夹具的最佳厚度为11.5 mm或12.5 mm.
|
| 关 键 词： | 单螺杆压缩机 星轮夹具 切削力 有限元 |
Design and Analysis of Holding Device of Star Wheel of Single Screw Compressor |
| |
| SUN Xingwei
,
JIA Yanan
,
WANG Ke
,
WANG Huiming.Design and Analysis of Holding Device of Star Wheel of Single Screw Compressor[J].Machine Tool & Hydraulics,2012,40(16):36-38. |
| |
| Authors: | SUN Xingwei JIA Yanan WANG Ke WANG Huiming |
| |
| Affiliation: | (Mechanical Engineering College,Shenyang University of Technology,Shenyang Liaoning 110870,China) |
| |
| Abstract: | The holding device of star-wheel in single screw compressor was analyzed and designed,and the three-dimensional solid model of the holding device was established by using a three-dimensional modeling software.The displacement variation when the holding device worked with different thickness were analyzed and compared by using finite element software.Finally,the optimum thick of the holding device is determined,at 11.5 mm or 12.5 mm. |
| |
| Keywords: | Single screw compressor Holding device of star-wheel Cutting force Finite element |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
