| 多斜孔薄板关键加工工艺研究 |
| |
| 引用本文： | 唐淋伟,马东平,黄攀宇,谢晶,胡洪学. 多斜孔薄板关键加工工艺研究[J]. 机械制造, 2020, 58(5): 64-67 |
| |
| 作者姓名： | 唐淋伟 马东平 黄攀宇 谢晶 胡洪学 |
| |
| 作者单位： | 中国空气动力研究与发展中心 四川绵阳621000;武汉重型机床集团有限公司 武汉430205 |
| |
| 摘 要： | 为达到跨声速风洞试验段壁板的技术指标,对多斜孔薄板的关键加工工艺进行了研究。在分析多斜孔薄板加工主要控制项和加工难点的基础上,重点研究了斜孔加工工艺、薄板平面度加工工艺和薄板防腐蚀工艺。在跨声速风洞壁板加工中应用所研究的多斜孔薄板加工工艺,确认可以满足技术指标。
|
| 关 键 词： | 风洞 壁板 斜孔 加工 |
Research on Key Processing Technology for Thin Sheet with Multiple Oblique Holes |
| |
| Abstract: | In order to achieve the technical indicator of the wall board of the transonic wind tunnel test section,the key processing technology for the thin sheet with multiple oblique holes was studied.Based on the analysis of the main control items and difficulties in processing of the thin sheet with multiple oblique holes,the research focuses on the processing technology for oblique holes,the processing technology for thin sheet flatness and the anti-corrosion technology for thin sheet.The application of the processing technology studied for the thin sheet with multiple oblique holes in the processing of wall board of the transonic wind tunnel confirms that it meets the technical indicators. |
| |
| Keywords: | Wind Tunnel Wall Board Oblique Hole Processing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
