Effect of Hardness Ratio on the Wear Performance and Subsurface Evolution of Ni3Al Matrix Composites |
| |
Authors: | Wenzheng Zhai Ahmed Mohamed Mahmoud Ibrahim Zengshi Xu Kang Yang Qiaoxin Zhang |
| |
Affiliation: | School of Mechanical and Electronic Engineering, Wuhan University of Technology, Wuhan, P. R. China |
| |
Abstract: | A favorable hardness ratio (Hdisk/Hpin = Hd/Hp) could lead to a transition to mild wear during sliding contact. To determine a more appropriate Hd/Hp value for the sliding wear, the dry sliding pin-on-disk wear tests of Ni3Al matrix composites (NMCs) with multilayer graphene (MLG) are undertaken at Hd/Hp values of 0.99, 0.83, 0.42, and 0.35 at sliding speeds of 0.1, 0.3, 0.5, and 0.7 m/s. It is found that the tribological properties of NMCs are strongly affected by the various hardness ratios. At 0.1 m/s, the friction coefficient decreases with a decrease in Hd/Hp value. The low friction coefficient is 0.14 and the wear rate is 0.9 × 10?5 mm3 N?1m?1 under the ceramic counterpart with Hd/Hp of 0.35. At 0.7 m/s, the tribological properties show the opposite trend with a decrease in Hd/Hp. At an Hd/Hp of 0.35, the smooth compact layer on the worn surface could decrease the friction at 0.1 m/s, and the improved hardness in the subsurface by strain hardening would play an important role in the improvement of wear resistance. Under the metal counterpart with Hd/Hp of 0.99, plastic deformation only occurs on the contact surface and the MLG could suppress further shear deformation in the subsurface, leading to a low wear rate (2.4 × 10?5 mm3 N?1m?1) and friction coefficient (0.15) at 0.7 m/s. |
| |
Keywords: | Solid lubricants self-lubricating composites self-lubrication friction solid lubrication wear self-lubrication |
|
|