|
|||||
|
|
| 联合收获机脱粒滚筒参数化CAD方法的研究 | |
| 引用本文： | 陈田,殷国富,崔新维,邓传玲,郭慧林. 联合收获机脱粒滚筒参数化CAD方法的研究[J]. 机械工程学报, 2001, 37(1): 104-108 |
| 作者姓名： | 陈田 殷国富 崔新维 邓传玲 郭慧林 |
| 作者单位： | 1. 四川大学制造科学与工程学院 2. 新疆农业大学 3. 中国收获机械股份有限公司 |
| 摘 要： | 介绍基于三维实体建模的联合收获机脱粒滚筒参数化计算机辅助设计 (CAD)方法与关键技术 ,提出脱粒滚筒参数化设计的结构模型和分析求解算法 ,应用MDT软件的二次开发环境研制出脱粒滚筒CAD系统。设计实例表明本系统有利于系列化产品设计并能提高设计效率。 |
| 关 键 词： | CAD 联合收获机 脱粒滚筒 参数化建模 |
| 修稿时间： | 2000-05-14 |
STUDY ON PARAMETERIZED CAD METHOD FOR THRESHING CYLINDER OF COMBINE HARVESTER |
|
| Chen Tian,Yin Guofu,Cui Xinwei,Deng Chuanling,GUO Huilin. STUDY ON PARAMETERIZED CAD METHOD FOR THRESHING CYLINDER OF COMBINE HARVESTER[J]. Chinese Journal of Mechanical Engineering, 2001, 37(1): 104-108 | |
| Authors: | Chen Tian Yin Guofu Cui Xinwei Deng Chuanling GUO Huilin |
| Abstract: | A parameterized computer aided design method and key technology of the combine threshing cylinder based on 3D solid modeling are introduced The structure models and the analyzed solving algorithms of parameterized design of the threshing cylinder are presented,the threshing cylinder CAD system is studied in secondary developing environment of MDT A practical design case shows that it benefits serialized production and improving the efficiency of design |
| Keywords: | CAD Combine harvester Threshing cylinder Parameterized modeling |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |