| 6063铝合金在不同应力状态下的变形及损伤行为 |
| |
| 引用本文： | 徐文福,车洪艳,陈剑虹. 6063铝合金在不同应力状态下的变形及损伤行为[J]. 机械工程材料, 2009, 33(1) |
| |
| 作者姓名： | 徐文福 车洪艳 陈剑虹 |
| |
| 作者单位： | 徐文福,XU Wen-fu(兰州理工大学材料科学与工程学院,甘肃兰州,730050);车洪艳,陈剑虹,CHE Hong-yan,CHEN Jian-hong(甘肃省有色金属新材料国家重点实验室,甘肃兰州,730050) |
| |
| 基金项目： | 国家重点基础研究发展规划(973计划) |
| |
| 摘 要： | 用平板拉伸、缺口拉伸、剪切试验结合断口形貌观察及有限元模拟等方法,对6063铝合金在三种不同应力状态下的变形及损伤行为进行了研究.结果表明:在不同应力状态下该合金的变形及损伤行为存在明显的差异,剪切时材料的断裂应变远大于平板和缺口拉伸时的,而缺口拉伸时材料的屈服强度及峰值应力大于平板拉伸时的;平板拉伸时试样为拉剪混合型断裂,断口由一定比例的韧窝和剪切平面组成;缺口拉伸时试样有明显的颈缩,断口以韧窝为主;剪切断口以剪切平面为主;损伤行为的有限元模拟结果与试验结果吻合较好.
|
| 关 键 词： | 6063铝合金 变形 损伤 有限元模拟 |
Deformation and Damage of 6063 Aluminum Alloy under Different Stress States |
| |
| XU Wen-fu,CHE Hong-yan,CHEN Jian-hong. Deformation and Damage of 6063 Aluminum Alloy under Different Stress States[J]. Materials For Mechanical Engineering, 2009, 33(1) |
| |
| Authors: | XU Wen-fu CHE Hong-yan CHEN Jian-hong |
| |
| Affiliation: | Lanzhou University of Technology;Lanzhou 730050;China |
| |
| Abstract: | Tensile tests with plat specimen,notched specimen and shear specimen were performed.The fracture appearance was observed by SEM. ABAQUS finite element calculation and simulation were done.The deformation and damage process of 6061 aluminum alloy under three different stress states were analyzed carefully.Studies indicated that there were evident differences in deformation and damage under different stress states.The fracture strain under sheaing state was higher than that of notched tension,while the yield ... |
| |
| Keywords: | 6063 aluminum alloy deformation damage finite element simulation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
