| 非回转体触头座挤压成形工艺与模具设计 |
| |
| 引用本文： | 郜建新,赵培峰,宋克兴.非回转体触头座挤压成形工艺与模具设计[J].模具工业,2013(7):60-62. |
| |
| 作者姓名： | 郜建新 赵培峰 宋克兴 |
| |
| 作者单位： | 河南科技大学 材料学院,河南 洛阳,471003 |
| |
| 摘 要： | 研究了高压开关触头座外形为非回转体的挤压成形工艺,介绍了采用两道工序挤压模结构及主要模具零件的设计方法,挤压成形的零件尺寸及形状精度达到了设计要求,模具结构简单,变形力小,提高了生产效率。
|
| 关 键 词： | 挤压模 非回转体 触头座 法兰 |
Extrusion process of non-rotator contact pedestal and its die |
| |
| GAO Jian-xin
,
ZHAO Pei-feng
,
SONG Ke-xing.Extrusion process of non-rotator contact pedestal and its die[J].Die & Mould Industry,2013(7):60-62. |
| |
| Authors: | GAO Jian-xin ZHAO Pei-feng SONG Ke-xing |
| |
| Affiliation: | (School of Materials Science and Engineering, Henan University of Science and Technology, Luoyang, Henan 471003, China) |
| |
| Abstract: | The extrusion process of non-rotator contact pedestal of a high-voltage switch was analyzed. The structure of two-operation extrusion die and the design method of main components were presented. The die has a simple structure and a small deformation force. |
| |
| Keywords: | extrusion die non-rotator contact pedestal flange |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
