| 基于MasterCAM X的加工中心专用后置处理器研究 |
| |
| 引用本文： | 唐清春,吴汉夫. 基于MasterCAM X的加工中心专用后置处理器研究[J]. 机械, 2010, 37(2): 43-45,69 |
| |
| 作者姓名： | 唐清春 吴汉夫 |
| |
| 作者单位： | 广西工学院,工程训练中心,广西,柳州,545006 |
| |
| 基金项目： | 广西工学院教改项目(J0902) |
| |
| 摘 要： | 通过分析MasterCAM X软件后置处理程序的结构、设计方法,得出其机床特性文件是用ASCII代码编写的,其扩展名为pst,称为pst文件。Pst文件由11个部分组成,该文件提供了更改NC代码的方法,以适用于选定的数控系统和机床。根据选用的数控加工中心以及数控系统的编程特点,通过修改Pst文件可以开发专用的后置处理程序,使MasterCAM X生成的程序能够直接应用于加工中心的加工,而不需要进行修改。
|
| 关 键 词： | MasterCAM X 后置处理 加工中心 |
Study on postprocessing program of center mill machine based on MasterCAM X |
| |
| TANG Qing-chun,WU Han-fu. Study on postprocessing program of center mill machine based on MasterCAM X[J]. Machinery, 2010, 37(2): 43-45,69 |
| |
| Authors: | TANG Qing-chun WU Han-fu |
| |
| Affiliation: | Department of Mechanical Engineering/a>;Guangxi University of Technology/a>;Liuzhou 545006/a>;China |
| |
| Abstract: | Through analyzing the structure of MasterCAM postprocessing program,combining programming characteristics of NC system ,getting an its tool machine characteristic document to write with the ASCII code,it expands to be named the pst,being called the document of pst. The document of Pst is constitute by 11 parts,that document provides to change the method of the code of NC,the number that to be applicable to make selection controls the system and tool machines.Control to process the center and number to contr... |
| |
| Keywords: | MasterCAM X postprocessing center mill machine |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
